본문 바로가기 주메뉴 바로가기
검색 검색영역닫기 검색 검색영역닫기 ENGLISH 메뉴 전체보기 메뉴 전체보기

논문

Measurement of the time required for termites to pass each other in tunnels of different curvatures

https://doi.org/10.1111/j.1744-7917.2012.01517.x

  • 저자Seungwoo Sim , Sang­Hee Lee
  • 학술지Insect Science 20
  • 등재유형
  • 게재일자(2013)


Subterranean termites construct complex tunnel networks for foraging. During travel in the tunnels, termites often encounter one another when passing in opposite directions. Such encounters are likely to affect the “ment efficiency,” which is the time required for a termite to travel a certain distance in a tunnel. In this study, we explored how individual–individual encounters affect ment efficiency in tunnels by measuring the time (τ) taken by two termites to pass one another in tunnels of different curvatures. Artificial tunnels of 5 cm in length and variable widths (W) of 2, 3, or 4 mm were made. Tunnel distance (D) was 2, 3, 4, or 5 cm. When D had a higher value, curvature was lower. When W = 2, τ was significantly shorter in the tunnel with D = 5 than in tunnels of D = 2, 3, or 4, whereas τ was statistically the same for D = 2, 3 and 4. When W = 3, τ was shorter in the tunnel with D = 5 than for D = 3 and 4, while τ was longer in the tunnel with D = 2 than for D = 3 and 4. When W = 4, τ was longer in the tunnels with D = 2 and 3 than for D = 4 and 5. Based on these observations, 3 types of termite behavior were identified: biased walking, backward walking, and zigzag walking. We considered these results in relation to foraging efficiency.


Subterranean termites construct complex tunnel networks for foraging. During travel in the tunnels, termites often encounter one another when passing in opposite directions. Such encounters are likely to affect the “ment efficiency,” which is the time required for a termite to travel a certain distance in a tunnel. In this study, we explored how individual–individual encounters affect ment efficiency in tunnels by measuring the time (τ) taken by two termites to pass one another in tunnels of different curvatures. Artificial tunnels of 5 cm in length and variable widths (W) of 2, 3, or 4 mm were made. Tunnel distance (D) was 2, 3, 4, or 5 cm. When D had a higher value, curvature was lower. When W = 2, τ was significantly shorter in the tunnel with D = 5 than in tunnels of D = 2, 3, or 4, whereas τ was statistically the same for D = 2, 3 and 4. When W = 3, τ was shorter in the tunnel with D = 5 than for D = 3 and 4, while τ was longer in the tunnel with D = 2 than for D = 3 and 4. When W = 4, τ was longer in the tunnels with D = 2 and 3 than for D = 4 and 5. Based on these observations, 3 types of termite behavior were identified: biased walking, backward walking, and zigzag walking. We considered these results in relation to foraging efficiency.

이 페이지에서 제공하는 정보에 대해 만족하십니까?